There are two linetype scales
- Global linetype scale (LTSCALE): A multiplier that applies to the whole drawing.
- Linetype scale of each object: A multiplier that each object can hold. The value for newly drawn objects is set by CELTSCALE.
The spacing you see is the product of these two values. Lines copied from other drawings, or lines drawn while CELTSCALE was set to another value, keep an individual value that is not 1.
Steps using standard AutoCAD features
- Run the QSELECT command.
- Set Apply to to Entire drawing, Object type to Multiple, Properties to Linetype scale, Operator to <> Not Equal, and Value to 1. Then click OK.
- In the Properties palette (Ctrl+1), change Linetype scale to 1.
- Enter CELTSCALE at the command line and set it back to 1, so new objects also use 1.
- Run REGEN to update the display.
Ask AI to do it in one step
Ask an AI client that has Drawing Rule Fixer for AutoCAD installed (such as Claude Desktop) with prompts like these:
- "Add to the rules: linetype scale must be 1"
- "Check this drawing"
The objects with a different linetype scale are returned as a list, with their layers and current values.
Checking is free. With a subscription, you can fix the listed objects to the rule value in one step, and check a folder of drawings at once. Fixes to a drawing open in AutoCAD can be reverted with a single UNDO.
Which method to use
For a single drawing, Quick Select is enough. If you check incoming drawings every time, or need to match dozens of drawings, tell the AI your rules once. After that, one request such as "Check this drawing" repeats the same check.
FAQ
What if the dash spacing is wrong on all lines?
Review the global linetype scale (LTSCALE). After you match the linetype scale of each object, set LTSCALE to suit the drawing scale. This brings the whole drawing into line.
Why does the spacing differ between paper space and model space?
It depends on the PSLTSCALE setting. Set it to 1 and the spacing is matched to the viewport scale.
Can I see which objects have a different linetype scale before changing anything?
Yes. The check result is a list with layers and current values. You can review that list before asking for the fix.
